I've been going back through my old movies removing all the adhesive nonsense and it feels so good.
source: Redditshow context
i imagine if it's glued down with some PL-400 or similar subfloor adhesive, that shit isn't moving for MANY years, however, i was thinking the same thing about the T&G in those boards.
source: Reddit show context
That's probably thermal adhesive not paste.
source: Reddit
Acetone should remove the adhesive, which is what makes the line stand out.
source: Redditshow context
either that or you could use any other sort of clear adhesive.
source: Redditshow context
Though some people will dis-agree, pins are mostly for aesthetic these days since our adhesive technology has improved so much.
source: Redditshow context
Afterwards I am going to mist and vacuum everything a number If times, and then use a spray adhesive to seal anything remaining.
source: Redditshow context
Plus, does the spit not dry enough to the point where you wouldn't even consider it spit anymore, just adhesive?
source: Redditshow context
OP's previous heatsink was installed with thermal adhesive instead of thermal past.
source: Redditshow context
Lighting a heatsink on fire causes the entire heatsink to uniformly heat up to just a high enough temperature to weaken the adhesive, but not high enough to damage the attached CPU.
source: Redditshow context
The grip part on my has started to come apart from the backing, I took one of them off and my controller is covered in adhesive shit now.
source: Reddit
I have some really tiny ones, from Always, that do work, but the adhesive sucks so I go through a ton of them because I can never get them to stick.
source: Redditshow context
Lined inside with adhesive cork on back and sides and as shelf liner.
source: Redditshow context
The theory is that the ammonia can work its way in and dissolve the adhesive, given time.
source: Redditshow context
You'll probably need to do a bit of scraping to get the old adhesive off afterwards.
source: Redditshow context
I bought a couple of granite tiles at home depot, some super fine metal sandpaper in different grades and glued them down on the granite with spray adhesive.
source: Redditshow context
I'll think if I go that route, I'll go with a wristband, or perhaps a strong adhesive glued to my skin.
source: Redditshow context
I will also take the mink lashes, the mac wipes, and duo lash adhesive.
source: Reddit
Afterwards if there is any adhesive left on the glass, Goo B Gone will get rid of it no problem.
source: Redditshow context
Self-adhesive plastic sleeve with hanging header.
source: Reddit
Actually a blow dryer will make the adhesive decure.
source: Redditshow context
Technically not adhesive, but charged.
source: Redditshow context
You'll want to look at info on working with worbla, which is sold in sheets, is adhesive on one side, and is easily moldable/sculptable when heated.
source: Redditshow context
is this a batt problem or just an adhesive problem?
source: Redditshow context
i. e., if you push it back down, is there something stopping it from going all the way down (batt) or does it go all the way down but not stay down (adhesive)?
source: Redditshow context
They love eating adhesives.
source: Redditshow context
Some ecies of ant will gravitate to adhesive as well.
source: Redditshow context
They have little adhesive bags they put on the baby's genitals that can collect it!
source: Redditshow context
You can also get sheets of adhesive foam at craft stores.
source: Redditshow context
It involves a piece of adhesive tape and a small piece cut out of the lid of a licensed Keurig pod.
source: Redditshow context
Also don't touch the sticky side of the wraps, the oils in your fingers will make them less adhesive.
source: Redditshow context
Or, cut a hole and drop a rubbermaid tub in the space using 3M adhesive to hold it in place.
source: Redditshow context
This gets me thinking.. What we could do with are universal faceplates by which we may attach seasonal adornments without having to use adhesives of any kind, or drawing pins and the like.
source: Redditshow context
The adhesive/static release is so satisfying.
source: Redditshow context
they're not magnetic, but they sell rolls of magnetic stuff w/adhesive on one side, so that's an option too, for those who don't want to go the painting route.
source: Redditshow context
Goo b gone (or any citrus based adhesive remove) is also very efficient.
source: Redditshow context
It's non adhesive, so it won't gum up your windows and you can take it off whenever.
source: Redditshow context
I wouldn't have known if they used some sort of adhesive to keep the 'leather' down.
source: Redditshow context
Must have for multi color fabric printing any cheap contact adhesive will do.
source: Redditshow context
What about LOCA adhesive?
source: Redditshow context
Or, crafting nappies from ripped sheets and adhesive tape.
source: Redditshow context
Without using a glitter adhesive, most of the shifts and sparkles are really sublte, but that one is just always there
source: Redditshow context
Okay, "permanent liquid adhesive" then.
source: Redditshow context
If the grills are hopelessly dirty, fresh grill cloth would cost you maybe $15 (cloth and adhesive).
source: Redditshow context
Spray the adhesive side with a 60/40 isopropyl alcohol/water mixture and then line it up.
source: Redditshow context