English sentences with glue to in context,

If you need glue to overclock maybe you shouldn't be overclocking after all.
source: Redditshow contexthide context

Your friend is right, it's not normal, as most inductors have their coils coated in epoxy or some other glue to hold them in place and prevent them from vibrating.
source: Redditshow contexthide context

I'd assume they applied black gel liner, then a glitter glue or eyelash glue to adhere the glitter.
source: Redditshow contexthide context

With loose sheets, you can use glue to bind, but generally you need a machine for that (and I have no clue how much that would run you).
source: Redditshow contexthide context

Even better, when I got home and pulled it apart the tab that was broken off the key was still inside the chassis, just took a little super glue to fix.
source: Redditshow contexthide context

What I would do is I would use thermal glue to affix the BA5SBA rtlsdr in its case to the inside of a larger case containing it and an upconverter.
source: Redditshow contexthide context

I used super glue to horribly fix it up and since then I can't fully extend it.
source: Redditshow contexthide context

If the roll out isn't installed yet I would drill a hole big enough on the back side and half way through the front and slide the dowel rod in and use wood glue to secure it.
source: Redditshow contexthide context

This does sound a little extreme, I have no hot glue to try it though.
source: Reddit

Although, the description says it's 1/100 scale, which is odd for high grades, so chances are it's a rather old kit (mid-90s or so, but the kits from that period onwards don't need paint or glue to build and are fairly good quality, so don't worry when it comes in an old-looking box).
source: Redditshow contexthide context

you can use it as a pass though as it charges via USB only problem i have had is that it's managed to push itself back just a little, some hot glue to glue down the usb charging board fixed that though.
source: Redditshow contexthide context

I also gave mine a bit of glue to insure it doesnt happen again.
source: Redditshow contexthide context

Can't tell you how many people post shit about using a magnet or super-glue to remove a broken key/fragment.
source: Reddit show contexthide context

I am not sure if it would work but a drop of super glue to hold it until you can replace it
source: Redditshow contexthide context

Mushroom piston isn't going to help much either- just get a sorbothane pad to glue to your cylinder head.
source: Redditshow contexthide context

Cheapest option is glue to cardboard, very cheap, easy and lightweight so you can hang anywhere
source: Redditshow contexthide context

When I dance I use them, but I use "sock glue" to keep them in place (also used by gymnasts and models to keep clothing in place.
source: Redditshow contexthide context

dont win bread alot but you bring glue to the table so thats value!
source: Redditshow contexthide context

You could always use some sort of non permanent glue to seal them if you want to be paranoid.
source: Redditshow contexthide context

Use sleeves/joints and pvc glue to seal lengths together.
source: Redditshow contexthide context

Wait a couple of minutes for the glue to dry, then take your tweezers (or your fingers, but I prefer tweezers for this) to gently squeeze your lashes and the false lashes together so that they blend more naturally.
source: Redditshow contexthide context

Unfortunately I don't have glue to assemble it yet as mine got lost somewhere in a move (hopefully I can get some this weekend).
source: Redditshow contexthide context

Had a friend that tried giving super glue to another friend who didn't even notice.
source: Redditshow contexthide context

You can use a little dab of hot glue to seal off empty cartridges so that you can carry a supply of extra ink with you.
source: Redditshow contexthide context

Wait a few seconds for the glue to become tacky.
source: Redditshow contexthide context

3) Apply glue to the top of the lattice, put the top piece on and brad nail the hell out of it while you are walking on it.
source: Redditshow contexthide context

I read this elsewhere on the internet and Worked for me when I had a couple of thousand in glue to sell!
source: Redditshow contexthide context

I read that something saying to add a dab of glue to the tips of your fingers to help you deal with some of the pain.
source: Redditshow contexthide context

Super glue to the rescue!
source: Redditshow contexthide context

Maybe add some wood glue to the outside of that to be safe and hammer that in if the sizing/material works so it doesn't crack stuff.
source: Redditshow contexthide context

Sand down a spot for sticking the mounts to the ski, and when you stick them, press them down with a wood clamp for a while to ensure full glue to ski contact.
source: Reddit

After melting the glue to reaccept the pages, use cardboard along the spine and front and back for rigidity and fasten with rubber bands for about an hour to cool.
source: Redditshow contexthide context

Nipple tassles to glue to your power buttons.
source: Reddit

I just used some hot glue to put some contacts in place with a mono audio cable from a junk box (or easily purchased for a few bucks).
source: Redditshow contexthide context

The better question is did I use super glue to ensure they stayed in those poses...
source: Reddit

You could use two scoops, one roll, and a little nacho cheese as glue to make a pipe (put it in the freezer for a few minutes).
source: Reddit

My son recently had a double ear infection and he was glue to my boobs for days.
source: Redditshow contexthide context

I'd much rather use regular eyeshadow primer and/or some glitter glue to achieve my desired effect.
source: Redditshow contexthide context

I use glue to plaster those ends down to the string adjacent.
source: Redditshow contexthide context

However some larger chains from what I've heard have started using "meat glue" to glue pieces of meat together.
source: Redditshow contexthide context

Needs glitter glue to use Sidecar though, that's a bummer.
source: Redditshow contexthide context

I have tiny gaps near the bottom mostly due to not adding glue to seal it up again.
source: Redditshow contexthide context

Using glue to hold down a troublesome corner can cause the screen to be under constant strain which will make it easier/more likely to crack.
source: Redditshow contexthide context

To preserve it try using some spray on really watered down white glue to help toughen it up.
source: Redditshow contexthide context

Because there needs to be glue to get them all to interact with each other w/o a mass amount of customization and/or recompile and none of them have api access.
source: Redditshow contexthide context